Long Service Life-manufacture,factory,supplier from China

Strongest harrow machine heavy duty offset disc harrow  pull  type disc harrow Product DescriptionThis LCBB heavy duty offset disc harrow is designed according to the Europe standard.It adopts the features on hydraulic offset modular structure, built-bearing composite design, reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance .This heavy duty offset disc harrow also can be used to clean the stubble before tillage ,  break the hardened and impervious soil surface, crush and spread straw into the field, shatter soil aft

Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg

LCBB series of heavy duty disc harrow was designed according to the Europe standard .It adopts the features on hydraulic offset modular structure,built-bearing composite design,reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance.This heavy duty harrow also can be used to clean the stubble before tillage,break the hardened and impervious soil surface,crush and spread straw into the field, shatter soil after tillage, and level the land and preserve soil moisture.

This type 3WT trailer boom sprayer is our new design according to  Australia standard, it adopt trailed part by tractor and ATV, it is driven by 12v, 120w  pump, reasonable structure, long life, durable, easy to transport, easy to adjust, the trailer boom sprayer can be used to spray the farm crops, lawn, fruiter, vegetable, trees on the road side. The capacity of trailer boom sprayer could be designed from 400-1500L.    ModelUnit3WT-400Working widthm2Gun spraying tube lengthm10case volumeL400Pump voltsv12Total weightkg120LinkageTraction

Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement. ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension   II type

ModelUnit3MQL-80Ridging rowrow1 or 2Ridging widthmm300-1000 (as requirements)Ridging heightmm150-300Tractor power requiredHP50-100Driven typeTractor PTO driven Transmission typeChain transmissionLinkageTractor 3 point hitch

The main function of bearings is to support the mechanical rotating body, in order to reduce the mechanical load friction coefficient of the equipment during the transmission process. Bearings are components that fix and reduce the load friction coefficient during mechanical transmission.

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement. ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement. ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

3QL series ridger plough is mainly suitable for ridging after the tillage in the field for potato, beans, vegetables etc. it is convenient to adjust the angle, the high ridge and the ridging rows. It can be easily spaced (widened or narrowed) as per the crop requirement. The wings angle can be changed as per requirement.ModelUnit3QL-33QL-43QL-5Working widthMm250032003900Ridging spacingMm700~900Ridging heightMm150~250Matched powerHp6080100LinkageThree-point suspension II type

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread

This mounted land scraper is a farm implements that uses the scraper which fitted between the front and back rear wheels to unknit land, the scraper can be lifted, sloped, revolved and extended.this machine is  Flexible and accurate, easy to use; applicable for constructing the roadbed and road surface, ditching the side slope, mixing road mixtures, removing snow, transporting grain materials and maintaining the dirt roads and gravel roads, etc.

this rear mounted rotary mower is the updated version from the type 9GX series.we add the chain in the front and rear of the tractor rotary slasher to protect the worker.

Opposed heavy duty disc harrow is well suitable for heavy clay soil, waste land and weedy field as well,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.The heavy-duty disc harrow can cultivate the soil instead of plough. ModelUnit1BZD-2.51BZD-2.81BZD-3.3Working widthmm250028003300Working depthmm180-200Q’ty of disc202428Total weightkg180020002500Matched powerhp90-120120-150160LinkageTrailed;hydraulic output 1 type(difunctional oil

Product Description 4U series of sweet potato harvester is mounted with the tractor of 12-60hp with back power and side power output shaft.The working principle of this potato digger is that the digging shovel digs up the soil and crops through the impetus of the tractor.

Product descriptions from the supplierOverview SHIFENG tractor mounted small potato harvester   1.It is a tractor mounted potato harvester for 20-70hp tractor.2.Dig the potatoes safely without cutting or damaging single potato.3. Not to affect the next crop's growth.   4UD series of sweet potato harvester is mounted with the tractor of 12-otato harvester is intended for potato excavation , tubers partial separation from the soil and tubers laying on field surface for their further picking up. A triangular beater is set on the potato harvester.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1BZ series of Hydraulic offset heavy disc harrow is well suitable for heavy clay soil, waste land and weedy field as well ,mainly suitable for stubble cleaning before farming , it can break the hardened soil and  return the chopped straw to the soil, and  also can crash the soil after tillage and level the land. The heavy-duty disc harrow can cultivate the soil instead of plow.ModelUnit1BZ-1.81BZ-2.21BZ-2.51BZ-3.01BZ-3.41BZ-4.01BZ-5.3Working widthmm1800220025003000340040005300Working depthmm200Q’ty of disc16202428323648Total weightkg1160125013501430155019002500Mat