Heavy Disc harrow Agriculture machinery 32 heavy-duty disc harrows customizable fast delivery speed-manufacture,factory,supplier from China

This hydraulic offset heavy disc harrow is trailed for 90-180hp tractor.Very own hydraulic device to boost and down the shipping wheel freely.Excessive great of difunctional oil cylinder.Extensively operating width of this heavy disc harrow.

It is a installed adverse mild disc harrow for 30-60hp.High performanceRobust capability of soil pulverizationThe tractor with out deflective trailed pressureThe operating depth of this established mild disk harrow can be adjusted freely though adjust the perspective between the disc body.

What is a disc plough used for?The disc plough is designed to work in all types of soil for functions such as soil breaking, soil raising, soil turning and soil mixing. It is used to open the new fields and to process the stony areas. It can be used easily at rocky and rooted areas.

This 3QL series agriculture equipment furrow ridger gadget tractor ridger is suitable for ridging after the tillage in the farm area. It includes heavy duty tubular field body, the complete device is made a lot stronger than everyday ones. This ridger is suitable for ridging after the tillage inside the field for potato, beans, vegetable etc.It is convenient to regulate the ridging top and the ridging rows and space between every ridge. It could be effortlessly spaced (widened or narrowed) consistent with the crop requirement. The rubber tires may be moved without problems.

This 3QL series agriculture machinery furrow ridger machine tractor ridger is suitable for ridging after the tillage in the farm field. It consists of heavy duty tubular box frame, the whole machine is made much stronger than regular ones. This ridger is suitable for ridging after the tillage in the field for potato, beans, vegetable etc. It is convenient to adjust the ridging height and the ridging rows and space between each ridge. It can be easily spaced (widened or narrowed) according to the crop requirement. The rubber tires can be moved easily.

Supplying high quality harrow and plough's spare parts, including discs, hubs, bearings, spacers, harrow shafts etc. We can also customize the parts according to sample or drawing. 

A chisel plough is capable of penetrate, split, and level soil even over rocky, hard, or wetland, unlike the normal plough.The chisel plough plays the initial loosening of the soil while leaving the trash on top.Not like the disc plough that reverts natural count number from constructing at the soil, chisel maintains the organic depend from the soil and lessens soil erosion.

During the operation of the automatic feeding corn thresher, the speed of the car must not be too fast or too slow, otherwise it is easy to block the feed inlet, feed evenly, such as uneven can lead to broken CORNCOB, low yield, plug.Troubleshooting: 1. the front hopper down rollers too close to the ground, resulting in large angle iron scraping. 2. If the band is too loose, adjust the roller upwards to reinstall the band. 3. the clutch is too loose, the Clutch U Card to the outside loose a few silk solution. 4.

This baldan disc plough is very popular by customers and widely application.It is standard 3 point linkage with four wheel tractors from 60hp to 160hp. The discs are rotary motion when tuning the soil.

1. At the beginning of the work, the Rototiller should be in the state of lifting, first combined with the power output shaft, so that the rotation speed of the cutter shaft increased to the rated speed, and then decreased the Rototiller, so that the blade gradually buried to the required depth. It is forbidden to combine the blade with the power output shaft or down the Rototiller after the blade is buried, so as not to cause the blade to bend or break and increase the load of the tractor. 2.