bearing Fast delivery customizable-manufacture,factory,supplier from China

Install bridge bearings on the half shaft to attenuate vibration and protect the half shaft and other components.The half shaft (drive shaft) is subjected to alternating stresses such as torsion, shear, tension and compression, and impact, which can also cause torsional and bending vibrations of the drive shaft, resulting in additional stresses; Uneven stress distribution; There is sliding friction between the drive shaft neck and the bearing.The shaft that transfers torque between the half shaft gearbox reducer and the drive wheel (previously mostly solid, but due to the easier control of une

Product descriptions from the supplierOverview            Agricultural machine parts disc harrow bearing house brazil bearing assembly          Product DescriptionDuo-Cone mechanical seals.Taper roller bearings to absorb load in two ways - axial & radial.Low maintenance.Long life span.Total length 178-248mm, Weight 12-24kg

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

Agricultural Disc Harrow Oil bathed bearing assembly  PRODUCT OVERVIEW   

Product descriptions from the supplier:PRODUCT DESCRIPTION:The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

1.In general, the efficiency of using axle bearings is similar to that of power and lubrication bearings, but the rocker arm hybrid lubrication bearings are much higher.2. The radial clearance of the axle bearing is relatively small, and the radial angular contact bearing can be pre tightened with pre tightening force to eliminate the clearance, resulting in high performance during operation.Compared to bearings of the same type, axle bearings have a smaller width and a compact structure.4.

The half shaft is used to transfer power between the differential and the drive wheels. The half shaft of a regular non disconnecting drive axle can be divided into three types: fully floating, 3/4 floating, and semi floating depending on the external support form.Expand the information on car drive shafts and design a transmission device for driving wheels located at the end of the car's transmission system. Its function is to transmit torque from the differential half shaft gear to the driving wheels.

ItemHSTAY6075Working   width7500mmWorking   depth250-300mmNo. of   discs60 pcsDisc   dimension660*6mmBearing Bearing assembly type， 中孔43， 圆轴42Total   weight6100kgMatched tractor   power240hpLinkage Trailed

----Products Show----  ----Package & delivery----    ----FAQ----Q1: Are you a factory or trading company?We are a factory with self-supported import and export right.  Q2: How can I trust on your company?We are a fully registered manufacture and exporting company by China Export Registration Authorities. Moreover, our products have been exporting to a number of countries including Switzerland, Russia, Spain, Netherlands, Australia, Peru, Thailand, Pakistan, Indonesia, Tanzania, Nigeria, South Africa, Sudan, Congo etc.

Disc harrow is mainly applicable to clean the crop residue before tillage, break the hardened soil and return the chopped straw to the soil, and  also can crash the soil after tillage and level the land.It can be used as tillage machine instead of plow on the cultivated land. With the efficient productivity, reasonable utilization of the power, great ability of cutting and shattering the soil , the soil surface is smooth and loosening after harrowing, it is well suitable for heavy clay soil, waste land and weedy field as well.

PRODUCT DESCRIPTION                                                Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc. which are exported to more than 70 countries of America, Thailand, Bolivia, Chile, Peru, Australia, South Africa, Tanzania, Nigeria, Ghana, Sudan, Botswana, Zambia, Zimbabwe etc.

Strongest harrow machine heavy duty offset disc harrow  pull  type disc harrow Product DescriptionThis LCBB heavy duty offset disc harrow is designed according to the Europe standard.It adopts the features on hydraulic offset modular structure, built-bearing composite design, reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance .This heavy duty offset disc harrow also can be used to clean the stubble before tillage ,  break the hardened and impervious soil surface, crush and spread straw into the field, shatter soil aft

Product descriptions from the supplierOverview Disc Harrow Spare Parts Disc Blade Boron Disc 26inch 28inch Notched Harrow blade    PRODUCT DESCRIPTION                                              Yucheng Hengshing Machinery Co.,Ltd, professionaly manufacture agricultural implements and spare parts including disc blades, harrow bearing assembly, harrow shaft, plough hubs etc.

LCBB series of heavy duty disc harrow was designed according to the Europe standard .It adopts the features on hydraulic offset modular structure,built-bearing composite design,reasonable structure, bearing seal, long life, durable, easy to transport, easy to adjust, easy maintenance.This heavy duty harrow also can be used to clean the stubble before tillage,break the hardened and impervious soil surface,crush and spread straw into the field, shatter soil after tillage, and level the land and preserve soil moisture.

The 3zt collection of spring cultivator is advanced from our organisation consistent with the call for of overseas market. this gadget adopts double-spring tension tool which allows the tines at some point of operation  to dance whilst meet with obstacles and go back to regular running fast after over them, by way of which the tines are blanketed .it has blessings of row spacing to be  with ease adjusted and the intensity to be without difficulty controlled.

The fertilizer spreader  is a kind of multifunction spreader, it is mainly used to apply base fertilizer before tillage, sow seeds after tillage and spread seeds and manure, limestone, chemical or organic fertilizers   in grassland and ranch.

ModelunitCDR-230CDR-2601LFS-5002LFS-1000Working widthm5-20 Capacity of fertilizer boxL230260480950－1050 PTO Rotation speedr/min540PTO spline 6 splineTotal weightkg6580160290Matched powerhp18－3030－405090LinkageThree-point suspension   I typeThree-point suspension   II type

3W series of sprayer is suitable for spraying the medicament for the planter of bean, corn, cotton, grain. Also for lawn, fruiter, vegetable, road side tree. The capacity could be 200L-1200L, the spraying width could be 6m-12m with 12-120hp tractor.ModelUnit3W-2003004005007009001000Working widthm610/12case volumeL2003004005007009001000 PTO Rotation speedr/min540Total weightkg8090130240/270310/340350/380380/400Matched powerhp1520-3030-4550-7060-8070-9070-100LinkageThree-point suspension I(II)type

The 3ZT series of spring cultivator is developed from our company according to the demand of foreign market. This machine adopts double-spring tension device which enables the tines during operation  to bounce when meet with obstacles and return to normal working quickly after over them, by which the tines are protected .It has advantages of row spacing to be  conveniently adjusted and the depth to be easily controlled.

3Z cultivator is suitable for cultivating corn, cotton, soybean, sugar beet, etc. It can perform cultivating, ditching, riding, deep loosing, etc. The rotary cultivator can break the harden soil, loose soil, and keep the underground water of soil, and clean the stubble of crop. This cultivating machine  is rational structure. It is safe, durable, and high efficiency. Modelunit3Z-23Z-33Z-43Z-5Working widthmm1100190029003700Working depthmm100-200No.

1LF hydraulic reversible plow is mounted with four-wheel tractor; it is used for the loam,sand loam , cultivated and dry land ,it can finish the furrowing work in double way.Model1LF-3301LF-4301LF-5301LF-3351LF-4351LF-535Working widthmm90012001500105014001750Working depthmm220-270Number of bottoms68106810Total weightkg5807509506208001000Matched powerhp507080557590LinkageThree-point suspension II type ,hydraulic output(difunctional oil cylinder),oil connection in 1/2” thread